Yard movement
Review surface, gradient, weather and route conditions.
ZJ / D SERIES
D-series image for reference. Model-specific equipment and configuration may vary.
DIESEL FORKLIFTS
ZJ D50
A 5-tonne diesel counterbalance forklift for operations evaluating heavier loads and a 3,000 mm lift height.
DieselCounterbalance
5 tRated capacity
3000 mmLift / fork range
2930 mmTurning radius
Speak directly with ZJ · +86 181 0331 8125
01 / MODEL IN CONTEXT
Start with
the work.
A 5-tonne diesel counterbalance forklift for operations evaluating heavier loads and a 3,000 mm lift height. Use the values below as a comparison starting point and confirm the final supplied configuration with ZJ.
Discuss ZJ D50Loading areas
Confirm load centre, lift height and attachment requirements.
Factory logistics
Compare dimensions, turning space and ventilation needs.
Destination spec
Confirm engine, emissions and documentation for the market.
02 / CHECK THE FIT
CATALOGUE VALUES / CONFIRM WITH QUOTATIONSix numbers.
One operating picture.
Read rated capacity together with load centre, lift height, fork dimensions and the space needed to manoeuvre.
03 / FULL SPECIFICATION
Every detail.
A clearer decision.
Choose a specification group to review the catalogue values for ZJ D50. Confirm the final supplied configuration with your quotation.
01
Capacity & dimensions
Size, load and manoeuvring data
| Rated capacity | 5000 kg |
|---|---|
| Load centre | 500 mm |
| Maximum lift height | 3000 mm |
| Mast height (lowered) | 2275 mm |
| Maximum operating height | 4250 mm |
| Free lift | 150 mm |
| Overhead guard height | 2350 mm |
| Body length (without forks) | 3240 mm |
| Length with forks | 4310 mm |
| Body width | 1480 mm |
| Wheelbase | 2100 mm |
| Turning radius | 2930 mm |
| Minimum right-angle aisle | 2900 mm |
| Minimum ground clearance | 175 mm |
| Fork dimensions | 1070 × 150 × 50 mm |
| Mast tilt (front / rear) | 6° / 12° |
| Truck weight | 6750 kg |
02
Power & equipment
Drive, energy and operating configuration
| Power source | Diesel |
|---|---|
| Operation | Seated |
| Tyres | Pneumatic tyres |
03
Source & verification
Catalogue identity and data traceability
| Original catalogue model | CPC50 |
|---|
Rated capacity depends on load centre, lift height and attachments. Engine, fuel system, emissions and destination requirements must be confirmed for the selected configuration.
MODEL GUIDE / ZJ D50
A clearer 5 ton diesel forklift
buying decision.
Use these model-specific checks to decide whether ZJ D50 belongs on the shortlist. The final machine must still be matched to the real load, route and destination.
Read the load correctly
ZJ D50 has a catalogue rated capacity of 5 t at a listed load centre of 500 mm. Capacity at the required lift height must be reviewed with the actual load and attachment.
Measure the complete route
Compare the 1480 mm body width and 2930 mm turning radius with the narrowest doorway, aisle and turning point on the route.
Confirm the operating system
Confirm the engine and fuel system direction, emissions configuration, ventilation and documentation required for the destination market.
COMMON QUESTIONS
About ZJ D50
Answers use the supplied catalogue values and identify where order-specific confirmation is still required.
Compare all diesel forkliftsWhat is the rated capacity of ZJ D50?
The supplied catalogue lists ZJ D50 at 5 t, with a 500 mm load centre. Actual available capacity must also be checked against lift height, attachment weight and the real load centre.
What lift height is listed for ZJ D50?
The catalogue lists 3000 mm. Confirm the mast type, lowered mast height, free lift and residual capacity required for the actual application.
How much working space does ZJ D50 need?
The listed body width is 1480 mm and the turning radius is 2930 mm. Check these values with doors, aisles, right-angle stacking space and the complete travel route.
How do I request a quotation for this 5 ton diesel forklift?
Send the maximum load and dimensions, load centre, lift height, workplace, shift hours, attachment needs, quantity and destination. ZJ will confirm the current ZJ D50 configuration before quotation.
04 / BUILD YOUR WORKING PACKAGE
Configure the lift.
Send one clear enquiry.
Choose the duty, energy direction, mast, running gear and attachments. Your choices become a structured WhatsApp enquiry for ZJ to verify.
The configurator prepares an enquiry, not a final engineering approval. ZJ will confirm capacity, load centre, stability, attachment compatibility, local compliance and availability before quotation.
SELECTION GUIDE / CONFIGURE AROUND YOUR WORK
The machine is only the start.
Load & attachment
Define your maximum load, load centre and any attachments before selecting a rated capacity.
Working environment
Discuss ventilation, floor conditions, gradients and available operating space.
Destination requirements
Confirm the engine, emissions specification and documentation for the country of use.
05 / SEE THE WORK
Picture the
operating context.
These illustrative scenes help frame questions about load, route, space, surface, power and delivery. They do not replace model-specific suitability confirmation.
ZJ brand visualisations · The actual machine, facility, people and operating conditions may differ.
06 / PREPARE THE ORDER
From selected model
to confirmed supply.
The catalogue starts the conversation. The quotation should define the actual machine, selected options, documentation, packing and delivery plan.
01 / REVIEW
Application & configuration
Confirm load, lift, working space, power requirements and relevant options.
02 / VERIFY
Specification & checks
Review the agreed configuration and order-specific inspection items.
03 / PREPARE
Packing & delivery
Coordinate protection, documents and shipping arrangements around the destination.
Illustrative ZJ brand scenes. The actual preparation, inspection, packing and supplied equipment depend on the confirmed order.
Prepare a ZJ D50 enquiryKeep exploring.
All productsD SERIESDiesel
A 4-tonne diesel model with a 1,480 mm body width, pneumatic tyres and 175 mm minimum ground clearance.
4 tRated capacity
3000 mmLift / fork range
2930 mmTurning radius
D SERIESDiesel
A 3-tonne diesel counterbalance forklift with pneumatic tyres, seated operation and a 3,000 mm lift height.
3 tRated capacity
3000 mmLift / fork range
2400 mmTurning radius
D SERIESDiesel
ZJ D25
Catalogue referenceA 2.5-tonne diesel forklift that adds capacity while retaining a compact counterbalance format.
2.5 tRated capacity
3000 mmLift / fork range
2450 mmTurning radius
YOUR NEXT MOVE STARTS HERE
LET’S LIFT
YOUR AMBITION.
Tell us what you move. We’ll start with your requirements.
ZJ
FOR YOUR BUSINESS. FOR YOUR NEXT MOVE.WHATSAPP +86 181 0331 8125