Warehouse transfer
Review load, lift and aisle dimensions for indoor material flow.
ZJ / E SERIES
ZJ branding visualisation. Final equipment and configuration may vary.
ELECTRIC FORKLIFTS
ZJ E50
An electric approach to heavier loads, with a 5-tonne rated capacity and 18.5 kW drive motor.
ElectricCounterbalance
5 tRated capacity
3000 mmLift / fork range
3300 mmTurning radius
Speak directly with ZJ · +86 181 0331 8125
01 / MODEL IN CONTEXT
Start with
the work.
An electric approach to heavier loads, with a 5-tonne rated capacity and 18.5 kW drive motor. Use the values below as a comparison starting point and confirm the final supplied configuration with ZJ.
Discuss ZJ E50Production support
Compare body size and turning radius around work areas.
Loading movement
Confirm surface, gradient and attachment requirements.
Shift planning
Match the battery and charging configuration to the operating pattern.
02 / CHECK THE FIT
CATALOGUE VALUES / CONFIRM WITH QUOTATIONSix numbers.
One operating picture.
Read rated capacity together with load centre, lift height, fork dimensions and the space needed to manoeuvre.
03 / FULL SPECIFICATION
Every detail.
A clearer decision.
Choose a specification group to review the catalogue values for ZJ E50. Confirm the final supplied configuration with your quotation.
01
Capacity & dimensions
Size, load and manoeuvring data
| Rated capacity | 5000 kg |
|---|---|
| Load centre | 500 mm |
| Maximum lift height | 3000 mm |
| Mast height (lowered) | 2150 mm |
| Maximum operating height | 4270 mm |
| Free lift | 80 mm, optional full-free-lift mast |
| Overhead guard height | 2130 mm |
| Body length (without forks) | 3250 mm |
| Length with forks | 4250 mm |
| Body width | 1200 mm |
| Wheelbase | 1550 mm |
| Turning radius | 3300 mm |
| Minimum ground clearance | 135 mm |
| Fork length | 1220 mm |
| Mast tilt (front / rear) | 6 / 12° |
| Truck weight | 5700 kg |
02
Power & equipment
Drive, energy and operating configuration
| Power source | Electric |
|---|---|
| Operation | Seated / car-style |
| Drive motor | 18.5 kW |
| Hydraulic pump motor | 16.5 kW |
| Hydraulic system pressure | 18 MPa |
| Travel speed | 15 km/h unloaded / 14 km/h loaded |
| Lift speed | 270 / 300 mm/s loaded / unloaded |
| Gradeability | 15 / 20 % loaded / unloaded |
| Tyres | Solid tyres |
| Battery type | Lithium-ion or lead-acid |
| Battery voltage / capacity | 60 / 72 / 80 V × 100 Ah, customisable |
03
Source & verification
Catalogue identity and data traceability
| Original catalogue model | CPD-50 |
|---|---|
| Catalogue reference | 2026 bilingual catalogue, page 7 |
Rated capacity depends on load centre, lift height and attachments. Battery chemistry, battery capacity, charge time and operating duration are confirmed with the selected configuration.
MODEL GUIDE / ZJ E50
A clearer 5 ton electric forklift
buying decision.
Use these model-specific checks to decide whether ZJ E50 belongs on the shortlist. The final machine must still be matched to the real load, route and destination.
Read the load correctly
ZJ E50 has a catalogue rated capacity of 5 t at a listed load centre of 500 mm. Capacity at the required lift height must be reviewed with the actual load and attachment.
Measure the complete route
Compare the 1200 mm body width and 3300 mm turning radius with the narrowest doorway, aisle and turning point on the route.
Confirm the operating system
Review the Lithium-ion or lead-acid and 60 / 72 / 80 V × 100 Ah, customisable direction together with shift length, charger supply and charging windows.
COMMON QUESTIONS
About ZJ E50
Answers use the supplied catalogue values and identify where order-specific confirmation is still required.
Compare all electric forkliftsWhat is the rated capacity of ZJ E50?
The supplied catalogue lists ZJ E50 at 5 t, with a 500 mm load centre. Actual available capacity must also be checked against lift height, attachment weight and the real load centre.
What lift height is listed for ZJ E50?
The catalogue lists 3000 mm. Confirm the mast type, lowered mast height, free lift and residual capacity required for the actual application.
How much working space does ZJ E50 need?
The listed body width is 1200 mm and the turning radius is 3300 mm. Check these values with doors, aisles, right-angle stacking space and the complete travel route.
How do I request a quotation for this 5 ton electric forklift?
Send the maximum load and dimensions, load centre, lift height, workplace, shift hours, attachment needs, quantity and destination. ZJ will confirm the current ZJ E50 configuration before quotation.
MODEL POSITION / 5 TON ELECTRIC FORKLIFT
Higher-capacity electric handling with a larger turning envelope.
Use this model-specific position to create a shortlist. It is not a substitute for the current technical sheet or configuration approval.
E50 is the 5,000 kg electric counterbalance direction in the E Series. Its listed 1,250 mm body width and 3,300 mm turning radius make route measurement especially important for factory, loading and heavy-material applications.
Compare E50 with E40 when the verified load is lower and with E70 when the application genuinely requires a higher-capacity electric platform.
Confirm battery voltage and capacity, charger supply, capacity at height, floor loading, tyre package, mast and attachment effects.
04 / BUILD YOUR WORKING PACKAGE
Configure the lift.
Send one clear enquiry.
Choose the duty, energy direction, mast, running gear and attachments. Your choices become a structured WhatsApp enquiry for ZJ to verify.
The configurator prepares an enquiry, not a final engineering approval. ZJ will confirm capacity, load centre, stability, attachment compatibility, local compliance and availability before quotation.
SELECTION GUIDE / CONFIGURE AROUND YOUR WORK
The machine is only the start.
Load & lift
Match maximum load and load centre to your required lift height and attachments.
Working space
Compare body dimensions and turning radius with your aisle, doorway and loading areas.
Battery & charging
Confirm battery chemistry, capacity, charger supply and your shift requirements with ZJ.
05 / SEE THE WORK
Picture the
operating context.
These illustrative scenes help frame questions about load, route, space, surface, power and delivery. They do not replace model-specific suitability confirmation.
ZJ brand visualisations · The actual machine, facility, people and operating conditions may differ.
06 / PREPARE THE ORDER
From selected model
to confirmed supply.
The catalogue starts the conversation. The quotation should define the actual machine, selected options, documentation, packing and delivery plan.
01 / REVIEW
Application & configuration
Confirm load, lift, working space, power requirements and relevant options.
02 / VERIFY
Specification & checks
Review the agreed configuration and order-specific inspection items.
03 / PREPARE
Packing & delivery
Coordinate protection, documents and shipping arrangements around the destination.
Illustrative ZJ brand scenes. The actual preparation, inspection, packing and supplied equipment depend on the confirmed order.
Prepare a ZJ E50 enquiryKeep exploring.
All productsE SERIESElectric
ZJ E40
Catalogue referenceA 4-tonne electric counterbalance model with a 16.5 kW drive motor and 3,000 mm standard lift.
4 tRated capacity
3000 mmLift / fork range
2850 mmTurning radius
E SERIESElectric
ZJ E35
Catalogue referenceA step up to 3.5 tonnes, with a 13.5 kW drive motor and hydraulic power steering.
3.5 tRated capacity
3000 mmLift / fork range
2850 mmTurning radius
E SERIESElectric
ZJ E30
Catalogue referenceA versatile 3-tonne electric counterbalance forklift for the materials that move your business.
3 tRated capacity
3000 mmLift / fork range
2500 mmTurning radius
YOUR NEXT MOVE STARTS HERE
LET’S LIFT
YOUR AMBITION.
Tell us what you move. We’ll start with your requirements.
ZJ
FOR YOUR BUSINESS. FOR YOUR NEXT MOVE.WHATSAPP +86 181 0331 8125