Vertical stacking
Check pallet type, lift height and residual capacity requirements.
ZJ / S SERIES
Catalogue product reference. Final ZJ branding, mast, battery and residual capacity are confirmed with the quotation.
ELECTRIC STACKERS
ZJ SW15
A 1.5-tonne pedestrian stacker with six listed lift-height directions and configurable battery capacity.
ElectricWarehouse equipment
1.5 tRated capacity
1.6–4.0 m optionsLift / fork range
800 mmBody width
Speak directly with ZJ · +86 181 0331 8125
01 / MODEL IN CONTEXT
Start with
the work.
A 1.5-tonne pedestrian stacker with six listed lift-height directions and configurable battery capacity. Use the values below as a comparison starting point and confirm the final supplied configuration with ZJ.
Discuss ZJ SW15Aisle planning
Compare the 860 mm body width and turning space with the route.
Indoor movement
Review floor condition, gradients and travel distance.
Shift planning
Confirm battery, charger and operating-time requirements.
02 / CHECK THE FIT
CATALOGUE VALUES / CONFIRM WITH QUOTATIONSix numbers.
One operating picture.
Read rated capacity together with load centre, lift height, fork dimensions and the space needed to manoeuvre.
03 / FULL SPECIFICATION
Every detail.
A clearer decision.
Choose a specification group to review the catalogue values for ZJ SW15. Confirm the final supplied configuration with your quotation.
01
Capacity & dimensions
Size, load and manoeuvring data
| Rated capacity | 1500 kg |
|---|---|
| Load centre | 500 mm |
| Maximum lift height | 1600 / 2000 / 2500 / 3000 / 3500 / 4000 mm |
| Overall length | 1850 mm |
| Body width | 800 mm |
| Turning radius | 1500 mm |
| Minimum ground clearance | 85 mm lowered fork |
| Fork length | 1150 mm customizable |
| Fork dimensions | 160 × 55 mm customizable |
| Truck weight | 410-557 kg by lift configuration |
02
Power & equipment
Drive, energy and operating configuration
| Power source | Electric |
|---|---|
| Operation | Walk-behind |
| Drive motor | 1.0kW |
| Hydraulic pump motor | 2.2kW |
| Tyres | Polyurethane |
| Battery type | Lead-acid or lithium-ion |
| Battery voltage / capacity | 48 V, capacity by configuration |
03
Source & verification
Catalogue identity and data traceability
| Original catalogue model | Pedestrian all-electric stacker 1.5T |
|---|---|
| Catalogue reference | 2026 bilingual catalogue, page 16 |
Rated capacity depends on load centre, lift height and attachments. Battery chemistry, battery capacity, charge time and operating duration are confirmed with the selected configuration.
MODEL GUIDE / ZJ SW15
A clearer 1.5 ton electric pallet stacker
buying decision.
Use these model-specific checks to decide whether ZJ SW15 belongs on the shortlist. The final machine must still be matched to the real load, route and destination.
Read the load correctly
ZJ SW15 has a catalogue rated capacity of 1.5 t at a listed load centre of 500 mm. Capacity at the required lift height must be reviewed with the actual load and attachment.
Measure the complete route
Compare the 800 mm body width and 1500 mm turning radius with the narrowest doorway, aisle and turning point on the route.
Confirm the operating system
Review the Lead-acid or lithium-ion and 48 V, capacity by configuration direction together with shift length, charger supply and charging windows.
COMMON QUESTIONS
About ZJ SW15
Answers use the supplied catalogue values and identify where order-specific confirmation is still required.
Compare all electric stackersWhat is the rated capacity of ZJ SW15?
The supplied catalogue lists ZJ SW15 at 1.5 t, with a 500 mm load centre. Actual available capacity must also be checked against lift height, attachment weight and the real load centre.
What lift height is listed for ZJ SW15?
The catalogue lists 1600 / 2000 / 2500 / 3000 / 3500 / 4000 mm. Confirm the mast type, lowered mast height, free lift and residual capacity required for the actual application.
How much working space does ZJ SW15 need?
The listed body width is 800 mm and the turning radius is 1500 mm. Check these values with doors, aisles, right-angle stacking space and the complete travel route.
How do I request a quotation for this 1.5 ton electric pallet stacker?
Send the maximum load and dimensions, load centre, lift height, workplace, shift hours, attachment needs, quantity and destination. ZJ will confirm the current ZJ SW15 configuration before quotation.
MODEL POSITION / 1.5 TON ELECTRIC PALLET STACKER
Pedestrian stacking with six listed lift-height directions.
Use this model-specific position to create a shortlist. It is not a substitute for the current technical sheet or configuration approval.
SW15 is a 1,500 kg pedestrian electric stacker with an 800 mm body width, 1,500 mm turning radius and listed lift directions from 1,600 to 4,000 mm. Capacity at the selected height still requires confirmation.
Compare SW15 with SW20 for a higher-capacity direction or SR15 when a stand-on operating format better matches longer internal routes.
Confirm pallet entry, residual capacity, lowered mast height, free lift, aisle width, battery chemistry and charger supply.
04 / BUILD YOUR WORKING PACKAGE
Configure the lift.
Send one clear enquiry.
Choose the duty, energy direction, mast, running gear and attachments. Your choices become a structured WhatsApp enquiry for ZJ to verify.
The configurator prepares an enquiry, not a final engineering approval. ZJ will confirm capacity, load centre, stability, attachment compatibility, local compliance and availability before quotation.
SELECTION GUIDE / CONFIGURE AROUND YOUR WORK
The machine is only the start.
Load & stacking
Confirm load centre, pallet dimensions and the required stacking height.
Aisles & clearances
Check turning space, racking clearances and floor conditions for the 35 mm ground clearance.
Working pattern
Share shift duration and charging opportunities so the battery configuration can be confirmed.
05 / SEE THE WORK
Picture the
operating context.
These illustrative scenes help frame questions about load, route, space, surface, power and delivery. They do not replace model-specific suitability confirmation.
ZJ brand visualisations · The actual machine, facility, people and operating conditions may differ.
06 / PREPARE THE ORDER
From selected model
to confirmed supply.
The catalogue starts the conversation. The quotation should define the actual machine, selected options, documentation, packing and delivery plan.
01 / REVIEW
Application & configuration
Confirm load, lift, working space, power requirements and relevant options.
02 / VERIFY
Specification & checks
Review the agreed configuration and order-specific inspection items.
03 / PREPARE
Packing & delivery
Coordinate protection, documents and shipping arrangements around the destination.
Illustrative ZJ brand scenes. The actual preparation, inspection, packing and supplied equipment depend on the confirmed order.
Prepare a ZJ SW15 enquiryKeep exploring.
All productsS SERIESElectric
ZJ SR20
Catalogue referenceA 2-tonne stand-on stacker with an 855 mm body width and a foldable operator platform.
2 tRated capacity
1.6–4.0 m optionsLift / fork range
855 mmBody width
S SERIESElectric
A stand-on electric stacker with an 860 mm body width and 3,000 mm lift height. Rated capacity requires confirmation.
To confirmRated capacity
3000 mmLift / fork range
860 mmBody width
S SERIESElectric
ZJ SW20
Catalogue referenceA heavier pedestrian stacker direction with 800 mm body width and multiple mast-height options.
To confirmRated capacity
1.6–4.0 m optionsLift / fork range
800 mmBody width
YOUR NEXT MOVE STARTS HERE
LET’S LIFT
YOUR AMBITION.
Tell us what you move. We’ll start with your requirements.
ZJ
FOR YOUR BUSINESS. FOR YOUR NEXT MOVE.WHATSAPP +86 181 0331 8125